Woodworking Posts

It is surprising how important is a tight throat plate to ensure successful sawing on the bandsaw. A  throat plate with a narrow kerf that flanks the blade neatly will prevent small wedge-shaped parts that separate during the sawing process from jamming the blade. Our Grizzly Band saw came with plastic throat plate that had unusually wide kerf. This plate agonized us for a long time, that is until I […]

The post How to Make a Plywood Throat Plate for Band Saws appeared first on Popular Woodworking Magazine.

In the October, 2017 issue of Popular Woodworking, page 10, I answered a question from a reader concerning how to handle paint on an exterior door that was beginning to lift at the cross-grain joints where water was able to get in and work its way underneath. This inspired another reader to ask how to remove black stains on his clear-finished exterior door (at least one coat of polyurethane) and […]

The post How to Get Rid of Black stains on an Exterior Door appeared first on Popular Woodworking Magazine.

Kudos to all who accepted last week’s challenge to match features of my recently completed dining table commission with the list of John Ruskin’s “moral elements of Gothic” from his magnum opus, The Stones of Venice. I am impressed by the thoughtful answers submitted by everyone who wrote in. The winner,  by virtue of having responded first, is Edward Hopkins. As I write this post on Sunday evening, I am […]

The post Ruskin’s Moral Elements of Gothic: A Foundation of the Arts and Crafts Movement appeared first on Popular Woodworking Magazine.

Greene & Greene (G&G) breadboard ends are never flush with the edge or top of a table top.  This proud look is then capped with a polished Ebony spline embedded in a mortise between the breadboard end and the table top infield. The spline profile is lifted (often called a cloud lift) to accentuate the proud look of the breadboard end relative to the infield.  Furthermore, the spline is pillowed […]

The post How to Make a Cloud Lifted Ebony Spline appeared first on Popular Woodworking Magazine.

We had some great videos this week, thank you all for submitting the best woodworking videos! I’d like to draw special attention to Simple Cove’s video series on building a cherry wall cabinet. He adapted the build from plans that appeared in the pages of our magazine and has shared the entire series in an easy to follow along format on his site, simplecove.com. Thanks, Sean! Here are the best […]

The post PopWood Playback #9 – Best Woodworking Videos of the Week appeared first on Popular Woodworking Magazine.

There are a lot of people who don’t see the point of having a panel-cutting sled, which is a sled that has its fence on its leading edge instead of on its trailing edge. The better solution, I’m told, is a giant sliding table that can handle a 4×8 sheet of plywood and have a stop system for repeatability. That approach is correct if you make kitchen cabinets for a […]

The post Panel-cutting Sleds – Just 3 Bits of Wood appeared first on Popular Woodworking Magazine.